Mts SWIFT 45 GLP Sensor Manual de usuario descargar pdf (Pagina 55)

Road Simulator

SWIFT

45 GLP Sensors

Installation

3. Tighten the 32 hub adapter bolts.

A. Following the sequence shown in the following figure, torque the 32

M12 bolts (1 through 32) to the value for the first increment shown in

the following table.

B. Repeat Step 3A for the second increment.

C. Repeat Step 3A for the final torque.

4. Tighten the M12 mounting bolts.

A. Following the sequence shown in the following figure, torque the eight

M12 bolts (A through H) to the value for the first increment shown in

the following table.

B. Repeat Step 4A for the second increment.

C. Repeat Step 4A for the final torque.

5. Tighten the M20 mounting bolts to the rim simulator.

A. Following the sequence shown in the following figure, torque the eight

M20 bolts (1 through 8) to the value for the first increment shown in

the following table.

B. Repeat Step 5A for the second increment.

C. Repeat Step 5A for the final torque.

Note To minimize negative clamping effects, you must torque the bolts in the

sequence shown.

6. Bolt the transducer/hub adapter to the road simulator fixture using the

modified lug nuts and shim washers provided.

OLT SIZE

TORQUE INCREMENT M12 M20

1st Increment 32.5 N·m (24 lbf·ft) 168.1 N·m (124 lbf·ft)

2nd Increment 65 N·m (48 lbf·ft) 336.2 N·m (248 lbf·ft)

Final Torque 97.6 N·m (72 lbf·ft) 501.6 N·m (370 lbf·ft)

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 105 106

Sin comentarios

Mts SWIFT 45 GLP Sensor Manual de usuario Pagina 55