Mts Series 322 Load Frame Lifting and Moving Manual de usuario descargar pdf (Pagina 6)

Lifting and Moving the Series 322 Load Frame

Prerequisites

You will need the following equipment:

• A fork lift or overhead crane capable of lifting the load unit. Ensure that the lifting equipment can

accommodate the weight of the load unit (see the table below)

• Lifting slings—not chains—to lift the load unit from its pallet

• Lifting chains to tip the load frame upright

• Rubber mats for the load unit’s feet to rest on

• Wooden blocks for the load unit's columns to rest on

• A knife to cut the packing straps

• Torque wrenches:

322.21 – 700 lbf·ft (950 N·m) capacity

322.31 – 1400 lbf·ft (1900 N·m) capacity

322.41 – 1400 lbf·ft (1900 N·m) capacity

• Molykote G-n paste

Inspect for shipping damage. Look for the following:

• Scratches in the load unit or lift cylinder columns

• Damaged electrical connections

• Damaged hydraulic connections

• Dents and other structural damage

• Torn, kinked, or breaking hoses

Report any damage found to both the carrier and to MTS. In the U.S. and Canada, call MTS Technical Support

at 1-800-328-2255. Elsewhere, contact your local MTS office.

Series 322 Load Frame Shipping Dimensions and Weights

WeightStandard Dimension PlatenModel

3000 lb (1370 kg)28 x 40 in (711 x 1016 mm)322.21

4500 lb (2050 kg)34 x 40 in (864 x 1016 mm)322.31

8500 lb (3870 kg)42 x 60 in (1067 x 1524 mm)322.41

6 Series 322 Load Frame Lifting and Moving

Lift and Move

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Sin comentarios

Mts Series 322 Load Frame Lifting and Moving Manual de usuario Pagina 6