Mts SWIFT 50 GLP Sensor Manual de usuario descargar pdf (Pagina 60)

SWIFT 50 GLP Sensors Installation

Road Simulator

Installing the Transducer

Equipment required This procedure requires one person. To install the transducer, you will need the

following equipment:

• Spindle adapter spacers (see next figure)

• Adapter to 329 simulator

• Anti-rotate assembly (including customer-supplied mounting arm)

• Small set of metric hex-head wrenches

• Tube bender for the restraint tube

• Tube cutter

• Metric socket head drive set (up to 14 mm) with extension

• Molykote g-n paste, 2.8 oz. tube (MTS part number 011-010-217)

• Nikal based anti-galling compound (MTS part number 011-354-902)

• Transducer mounting bolts (per transducer)

For dual rims

16 size M16 X 1.5 mm

8 size M10 X 1.5 mm

4 size M5 X 0.8 mm

lug nuts and shim washers

For front rims

16 size M16 X 1.5 mm

8 size M10 X 1.5 mm

4 size M5 X 0.8 mm

lug nuts and shim washers

• For dual rims

Slip ring extension assembly

Four size M12 X 1.75 mm X 30 mm long bolts

• Slip ring assembly fasteners

Four size M8 X 1.25 mm X 20 mm long bolts

• Torque wrenches, capable of the following ranges:

24–74 N•m (18–55 lbf•ft),

203–815 N•m (150-600 lbf•ft);

108–325 N•m (80–240 lbf •ft)

93 N•m (69 lbf•ft)

• Cables (transducer and BNC, plus customer-supplied from transducer

interface to data recorder)

• Tie wraps

• Data recorder

• Power supply–12 V DC or optionally 24 V DC

power supply

1 If 24 Vdc compatible electronics was ordered at time of purchase.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 69 70

Sin comentarios

Mts SWIFT 50 GLP Sensor Manual de usuario Pagina 60