Mts Multi-Pump Control Manager Remote Human-Machine In Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 34
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
Remote Human Machine Interface Introduction
3
Introduction
The Remote Human Machine Interface (RHMI) allows you to operate a single
Hydraulic Power Unit (HPU) remotely. The RHMI comes in two configurations:
a standalone unit and a pedestal mount unit. The standalone unit can be placed on
a table or mounted on the wall.
Note The RHMI can only be used on the G2 HPU models. It will not work with
the older HPU models. Contact MTS for additional information.
There is one RHMI per one HPU. The RHMI can be located away from the HPU
in a location of your choice; for example a control room or laboratory.
Intended use The intended use is to provide remote operation and status information for a
HPU.
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 33 34

Comentarios a estos manuales

Sin comentarios