Mts Multipurpose Simulated Manual de usuario descargar pdf (Pagina 57)

5. Reset the interlocks if needed and select the Low, then High, power buttons.

6. Click Run to run the test.

5.4.2.0 Set the FGC DCPD Test Parameters

5.4.2.1.0 Test Parameters Overview

After a new test run is added to the test, the Main Menu window appears.This window provides access to

all necessary test parameters. Click the parameter buttons in the Main Menu window to specify parameter

values for the test.

5.4.2.2.0 FCG DCPD Parameter Values for Simulation

The sample test includes a test run with test data that can be analyzed. If you want to reproduce the same

results in another test run, add another test run, and then specify the following values for the test parameters.

Other parameters not listed here should remain unchanged.

Precrack Parameters

Precrack Parameter Values

Value to Use for SimulationParameter

10 HzPrecrack Frequency

25 mmPrecrack Final Crack Limit

1 kNPrecrack Measure Load Level

0.1 unitlessPrecrack Load Ratio

0.1 kN/mm^1.5Precrack Final Maximum K

1000000 countPrecrack Cycle Limit

Crack Growth Parameters

Delta K Parameter Values

Value to Use for SimulationParameter

True SineFCG Wave Shape

10 HzFCG Frequency

0.2 kN/mm^1.5FCG Delta-K Initial

0.1 unitlessFCG Load Ratio

MTS TestSuite 57

5.0 Running Simulation Tests

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 99 100

Sin comentarios

Mts Multipurpose Simulated Manual de usuario Pagina 57