Mts SWIFT 10 ATV Sensor Manual de usuario descargar pdf (Pagina 93)

Road Simulator

SWIFT 10 ATV Sensors Installing the Transducer

Note The encoder has a dot on the mounting flange connected to the slip-ring

bracket and another dot on the slip-ring connector housing where it

interfaces with the mounting flange. These dots, when aligned next to

each other, indicate the index mark is under the encoder sensor.

2. Rotate the adapter plate, as necessary, until the Fz on the axes icon (see the

next figure) printed on the transducer label is pointing up.

3. If not already assembled, attach the inclinometer to the level bracket using

the two 6-32 UNC fasteners provided.

Apply Locktite 222 to the threads on the fasteners. Torque each fastener to 2

N•m (18 lbf•in).

Axes Icon

S20-22

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 143 144

Sin comentarios

Mts SWIFT 10 ATV Sensor Manual de usuario Pagina 93