Mts SWIFT 10 MC Sensor Manual de usuario descargar pdf (Pagina 30)

SWIFT 10 MC Sensors

Transducer Interface

Hardware Overview

The TI transforms four inputs (amplified bridge signals) into two forces and one

moment by the following process:

• Applying a zero offset and scaling the signals

• Using a geometric matrix to transform the signals into two forces and one

moment in the transducer reference frame

• Using a cross-coupling matrix calculation to scale and sum the individual

signals into each output

• In spinning applications, using a rotational transformation to put the forces

and moments into a stationary reference frame

The TI conditions the transducer signals, producing four analog output signals

proportional to the following values:

• Longitudinal force (Fx)

• Vertical force (Fz)

• Driving/Braking moment (My)

• Angle output (θ)

Analog signals The force and moment signals are output from the TI in the form of ±10 V

full

scale analog signals. These signals can be used by most data acquisition systems.

The angle output is an analog voltage that is proportional to angular position. At

0° the output is 0 V. At 360°, the output is 5 V.

Fx1

Fx2

Fz1

Fz2

Geometric

Matrix

Zero and

Scaling

Cross

Coupling

Matrix

Rotational

Transformation

Inputs Output

Transducer Interface Functions

S10MC-06

1. Standard from MTS. Other full-scale output voltages can be evaluated and may be

provided at special request.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 143 144

Sin comentarios

Mts SWIFT 10 MC Sensor Manual de usuario Pagina 30