Mts SWIFT 10 MC Sensor Manual de usuario descargar pdf (Pagina 65)

Road and Track Vehicles

SWIFT 10 MC Sensors Installing the Transducer

F. Loosely secure both rim hub adapters to the modified rim using the M6

socket head cap screws, a washer on each side of the rim hub adapters,

and Nylok nuts (as required).

G. Following the outer bolt pattern sequence shown in the Bolt Torque

Sequence figure, torque the twenty M8 bolts (1 through 20) on one side

of the transducer to the value for the first increment shown in the Bolt

Torque Increments table.

Repeat this step for the twenty fasteners on the other side of the

transducer.

Note To minimize negative clamping effects, you must torque the bolts in the

sequence and increments shown.

H. Repeat Step 5G for the final increment.

I. Repeat this entire step for the other wheel, as necessary.

J. Continue with Step 6.

Bolt Torque Sequence

6. Wipe the unpainted mating surfaces of the components needed to complete

the assemblies with a clean dry cloth.

Use cottons swabs or other soft tool to clean the coupling teeth on the inner

hub adapters and transducer.

Bolt Torque Increments

ORQUE INCREMENT M8 BOLT SIZE

1st Increment 19 N•m (14 lbf•ft)

Final Increment 38 N•m (28 lbf•ft)

S10MC-15

Inner Bolt

Pattern

Outer Bolt

Pattern

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 143 144

Sin comentarios

Mts SWIFT 10 MC Sensor Manual de usuario Pagina 65