Mts SWIFT 50 GLP Sensor Heavy Trucks Manual de usuario descargar pdf (Pagina 45)

Road and Track Vehicles

SWIFT 50 GLP Sensors Installation

C. Place the top plate, with extensions attached, over the standoffs.

Orient the top plate such that the Board A extension (see the labeling

on the top plate) is aligned with the Board A connector on the

transducer.

Note Use care when installing the top plate and extensions. The 9-pin

connectors are keyed. The top plate and extensions should be fitted on

straight (without bending or angling it) to make sure they engage the four

connectors simultaneously and evenly.

D. Secure the top plate to the standoffs using the four M12 bolts and

washers.

Lubricate the threads with Molykote g-n paste and torque to 93 N•m

(69 lbf•ft).

Standoffs (4)

Top Plate

Slip-Ring

Bracket

M12 Threaded

Studs (4)

Extension

Brackets (4)

S50-40

M12 Bolts (4)

and Washers

Anti-rotate

Hinge

Assembly

Tube

Cable

Conduit

Bracket

Slip

Ring

Hinge

M8 Bolts (4)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 111 112

Sin comentarios

Mts SWIFT 50 GLP Sensor Heavy Trucks Manual de usuario Pagina 45