Mts WIFT Mini Transducer Interface Manual de usuario Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
SWIFT
®
Mini TI
Transducer Interface Setup
41
Transducer Interface Setup
Overview Two different software configurations are used by the TI, depending on whether
you will be using the SWIFT sensor on the test track (typical for spinning
application) or in the laboratory (typical for non-spinning or fixed application).
Angular transformation is required on the test track only. If you are using the
same transducer and TI for data collection on the test track and simulation testing
in the laboratory, you must change the software configuration in the TI when you
change testing modes.
Contents USB Driver Installation 42
Select a Zero Method 44
Calibration File Elements 45
Upload the Calibration File 47
Edit the Calibration File 48
Download the Calibration File 52
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 85 86

Comentarios a estos manuales

Sin comentarios