Mts TestLine Manual de usuario descargar pdf (Pagina 67)

2. Set up a force waveform using the Function Generator.

This introduces a force waveform to the specimen.

a) In the Station Manager main window, click the Function Generator button.

b) Set up a force waveform using the following parameters:

• Channel — Ch1 (or other depending on your configuration)

• Control Mode — Displacement

• Command Type — Cyclic

• Target Setpoint — 0.000 mm

• Amplitude — 2.000 mm

• Frequency — 1 Hz

• Wave Shape — Ramp

• Compensator — None

3. Open a Station Manager Scope.

Click the Scope button in the Station Manager main window.

4. Set up the Scope.

MTS TestLine Test System Operation | 67

Running the Example HCF Test

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 131 132

Sin comentarios

Mts TestLine Manual de usuario Pagina 67