Mts TestLine Manual de usuario descargar pdf (Pagina 80)

Use the following parameters:

• Meter Type — Timed

• Channel — Ch1 (or other depending on your configuration)

• Signal — Force

• Engineering Units — kN

Zero Displacement and Force Signals

With the actuator at mid-travel and no force on the load cell, zero the displacement and force signals.

1. Auto offset the Displacement signal.

a) Click the Station Setup button.

b) Select Channels > Ch1 > Displacement > Channel Input Signals button > Offset/Zero tab.

c) Click the Auto Offset button.

2. Auto offset the Force signal.

80 | MTS TestLine Test System Operation

Running the Example HCF Test

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 131 132

Sin comentarios

Mts TestLine Manual de usuario Pagina 80